I have played Aion: The Tower of Eternity since open beta in China, and waited for about two years till it was out. Needless to say, I was not disappointed. I'd even play it now, if I had any time to do it, Aion is a very demanding game about being online every day (daily quests, limited purchase of craft items once in every 24 hours or so, arena fights, tickets, flower watering :D) if you want to do good, and my extensive cosplay hobby gets in a way of that :) fun fact - every time I played Aion (had to start over when it transfered to Gameforge, but I was happy to) I was an armorsmith there! My latest character Dulcinea the asmodian cleric is even a master armorsmith. Hopefully I can be that in real life too, at least cosplay-wise.
However, the outfit I chose from Aion is a leather armor. I just really wanted to finally learn to sew, also it was a time before Christmas, and snowflakes stole my heart.
Here are some of my references:
The bow was made out of pvc foam board, 5mm thick sheets, to be exact. The right amount of same part pieces were cut out, all glued together with cyaoacrylic glue, and then shaped with a rotarry tool. Later sanding, filling, and more sanding and then more filling took part. Here are some pictures so you know what I'm talking about:
The bow has sparkly blue gems visible from even an inner side, so I made 8 thin strips from PET plastic, painted each with nail polish by tapping the brush all over the thing with about 10 different colors and glued those to every side on the bow "wings". Look over here:
I made the snowflakes for the costume, as well as entire tiara, also from crystal resin. I have first coppied the patterns from my references using photoshop (I also used it to get proportions), and cut each different snowflake branch out of thick paper:
This on the left is the smaller snowflake branch I had to make. You can find it around my large (relatively) gemstone on the tiara.
I baked all the snowlfake branches (I was using Super Sculpey to make them), and molded in Mold Max 30 silicone rubber, and then kept pouring those molds with crystal resin, once every two days, as it took days for each branch to cure :) I finished with all the snowflakes only a day before the shoot due to that, but one of my main goals with this costume was to have snowflakes, that look like ice. The hexagon are made from either polycarbonate plastic (large ones), or also resin (all the small ones).
I sanded the back of each branch as resin poured over the edges at times, glued every snowflake together with Bison contact transparent glue, sprayed all of them with acrylic gloss varnish for extra icey shine, and put some silver gilding wax at the edges from the back side, for even more dimension and a cold gradient look.
Back to the progress of the bow: the center part. Two sheets of pvc foam board were used for the base, one full, and one with holes for the gems cut out:
After that I took some of my favorite material - Apoxie sculpt, that is air dry, super sandable, and fairly easy to work with and sculpted all the 3D details on it. By then I already had my super amazing sculpting tools in, so it was much more fun.
Two days later, eveything is sanded and sprayed with spray filler:
And after it was painted and gemstones inserted (gemstones surely made the same way, and the "cross" part is 3 layers of translucent colored film in purple, blue, and silver foil all on top of each other. I have used white acrylics spray paint and spray paint can in gold, which was later washed in brown acrylic water, and further "killed" by a clear coat.
I have also used... a pencil with water to add some dimension to the white parts on the entire bow, it's amazing what you can do with it, just dip the pencil tip in water and draw on the edges and cavities of the prop, and clean ir off with a cloth - not everything cleans off, and the weathering effect from the pencil is silver-grey, which is exactly what Noble Tac Officer's Bow needs.
The last part of the bow front is made of Worbla. I have heated the material to a putty state and made swirls of it, then built around somewhat of a patterns, coppied of this, not sure if you can see what is supposed to be there. I know I couldn't, so I did my best:
Now, on to the armor! I have taken something like a "cast" of my shoulder using Cobracast:
And then sculpted the shoulder piece looking at the reference from plasticine just to be used for patterns:
I covered the sculpt in painters tape, marked the edges of each part, peeled it off and cut it - equals patterns (below)
Colored in white spray acrylics paint, and the gem-like details are made using transparent films and nail polish (don't want to get into the smallest detail, but I may provide a tutorial later on this, as it's not something I seen anyone do before).
Shoes: I have bought my shoes on Ebay and coated with the same faux leather I used for the dress, and the back details are made from pvc foam board with apoxie sculpt detailing, and the "flappy parts" are chiffon on a transparent clear film, thus giving it studiness but still looking like fabric!
As you can see my tights in this picture, I shall now move onto how I made those. I bought regular 40 den grey tights and put those on my dummy legs. Pulled out the snowflake patterns from the references (3 different size snowflakes, exactly as is), cut them out in paper and then craft foam:
Got a pair of extra hands provided by a friend Ieva, and using a textile spray paint, I stamped the tights:
Spray - flip, place, press, press the edges - peel. Repeat for each snowflake, and that's it!
Another part of my costume is the collar: I made it from craft foam glued at the edges (I had first tried a colored foam and painted it, but it cracked all over the place, so then I got some white craft foam and made the collar without paint). I also cut and curled feathers for it, and the brooch is made from pvc foam board with a resin snowflake:
The back of the collar has also two chiffon on a film wings with a part very similar to what on my shoe heels, but I didn't take the WIP photo of it, as it was literally made on the last night and photos was the last thing on my mind :(
Gloves were sewn from faux leather(same as the dress and the shoes cover pieces) and the bracers made from also white craft foam, covered with feathers, to maintain the unique Aion feather look, and yet fluffy:
And now I guess we are finally down to the dress. This was the most scarry part for me. I have not done a lot of sewing before this, definitely no whole dresses in my collection. Thankfully I had guidance provided by my very good friend and cosplay partner Ieva, who tought me so much!
First I surely sewn a dummy dress from the crappy fabric:
After this I had a hang of sewing straight lines already, so I sewn the original dress from the strechy faux leather (because LEATHER ARMOR :D), with some sequin strechy fabric and a built it, yet somewhat separate strechy underskirt.
I sewn all the snowflakes on it with a clear sting, and all the fixing of everything on my armor are clear straps - kind of like bras have, you know? They almost completely dissapear in the photos and are super easy to remove if any is left :)
And then lastly I cut my long wig into a shorter one and styled it with some flattening iron and hairspray.
My guess is, this costume looks much simpler when you first look at the reference. So I thought too, but then when I decided to do every single detail, it appareared my 7 weeks vanished into thin air so fast, I forgot what sleep feels like. Finally I can rest a bit, maybe long into Aion? :D While I do that, check out my finished costume:
Costume, props and model and this horribly long write up: Dulcinea Cosplay https://www.facebook.com/DulcineaCosplay
Make up by Eglė Bžeskaitė
Photos and editing by Indrė Sipaitė Kuodienė
Studio by Tomas Dinda
Support team, santa's little helpers : members of Bearded Pegasus Forge: Ieva, Rokas, Rimas.